We would love to hear any feedback you have as this helps us provide better models and don’t forget to share you prints and build photos with us, we love to see them.

Please note that this model has not been printed by us yet but has had all necessary checks done to ensure printability and should print with no problems.

If you experience any problems with the files or printing process please get in touch and we will endeavour to resolve any issues in a timely manner.

Email - iconic3dmodels@gmail.com / 3dprintoutz4u@gmail.com

this model was downloaded from 3D warehouse as a sketchup model and converted into an stl.
the stl was then repaired and made printable.

Anycubic

All-metal Mega

No

Yes

Suggested settings

Buddha.

Filament - Any

Nozzle size - 0.4mm

layer height - 0.2mm

Print temperature - 190-220c

Print speed - 40-50mm/s

Layer settings - top & bottom - 4-5 / wall -3-4

infill - 15%

Supports - supports will be required

Print time - 6-8 hours

Filament required - 24-26 meters

difficulty rating - easy

Model dimensions - L - 77mm / W - 72mm / H - 108mm

Buddha 2

Filament - Any

Nozzle size - 0.4mm

layer height - 0.2mm

Print temperature - 190-220c

Print speed - 40-50mm/s

Layer settings - top & bottom - 4-5 / wall -3-4

infill - 15%

Supports - supports will be required

Print time - 6-8 hours

Filament required - 24-26 meters

difficulty rating - easy

Model dimensions - L - 97mm / W - 76mm / H - 110mm