This is a camera mount for the Tevo Michelangelo,

There are 3 holes, 2 needs to be tapped with M5 so you can mount it on the bed carrier, the third one is to get more strength on the split part, put here a M4 screw and M4 nuts with washers. (see pictures) I also suggest to tap M5 in the bed carrier otherwise this will come loose over time. In one my pictures above it is tapped in to the bed carrier.

Use this mount in combination with:
https://www.thingiverse.com/thing:460578
or
https://www.thingiverse.com/thing:1228521
for a Logitech C270/C170

I made and tried different models but small size of the bed and movement didn't help much, specially when you want to do a time lapse videos, so I had to attach the mount on the bed carrier.

I made 2 models, the one in the pictures is the longer version but if you have only Tevo Michelangelo as printer, you can't print the longer version, because it is big for the build area, but I also made a shorter version to make it possible to print on Tevo Michelangelo, you have to turn around with the model in the slicer but it will definitely fit.

Get another lens if the camera is still to close.

Also made a smal adjustment on the height where the camera is mounted, it is 10mm lower now, in the pictures I used the higher one but while testing the X carriage was in the way, you will see what I mean when you check the time lapse I made.

There might be some vibration while printing infill.

Time lapse:
https://www.youtube.com/watch?v=ES4OM_K_tWw
Forgot to level the bed, it is higher on 2 corners but it is about the mount.

Anycubic 4Max

No

Yes

0.2mm

20%