This little spice scoop prints pretty well with the flat side down. You can print with or without support, depending on your printer. You can file down the little edges after printing.

Edit:
On request, I have added two longer versions of the scoop.
50 mm -> original version, 50 mm long in total, the handle has 20 mm
60 mm -> 60 mm long in total, the handle has 20 mm
70 mm -> 70 mm long in total, the handle has 20 mm

If you need other sizes, feel free to ask.

Creality

CR-10S

Doesn't Matter

0.2 mm

10%