Lithographs are a fun, easy print that can be made by simply uploading any image you like to the image to STL converter linked below. I wanted to have a backlit display for my litho so I designed this stand for the LED display base I found on Amazon. The circle base is designed to fit a 3.94"/10cm circle and the square is designed to fit a 2.75" x 2.75" (7cm x 7cm) base, other similar looking bases found on Amazon should work as well if they have the same dimensions as the two pack linked below.

LED display bases:
https://www.amazon.com/Display-LETS-RESIN-Lighted-Crystal/dp/B07T6ZS2XZ/ref=pd_rhf_se_p_img_1?_encoding=UTF8&psc=1&refRID=7M6CMJBEFHVHKGWBFZ7P

These stands was designed for lithographs printed using the website below using the "Arc" shape in the "Model" tab with otherwise default settings. The lithograph in the image was 100mm tall by 75mm wide then scaled to 75% in Cura. A 100mm x 75mm litho scaled to 100% works even better. Use WHITE FILAMENT for lithographs, I don't believe other colors work. Some filaments work better than others.

Lithograph file converter:
https://tool.itslitho.com/CreateModel

I have included the STL file for the circular base as well although I have not printed one yet.

Update 3/5/21: A fillet was added to the top outer edge of the circular display base to improve aesthetics.

Creality

Ender 3

No

Yes

200

20

Printed at 225°C with a 67°C bed temp at 50mm/s. Use a raft and no supports for the lithograph.