This is a BlueSCSI drive sled for use in beige vintage Macintosh computers. Models like the Quadra 610 and 660AV plus most of the beige PowerPC desktops and towers.

In some models it will clip securely into place, for others it is simply held in by the friction of the sled. It should be amply secure and strong enough for the BlueSCSI v2 device.

The mounting holes are designed for 5mm M3 screws (snug fit).

This is not compatible with the BlueSCSI v1.

The BlueSCSI v2 2023.10 board revision resulted in the mounting holes moving from their previous location. As a result this design will not work with that newer revision. I will make an update for the 2023.10 soon.

Creality

K1

No

Yes

0.2mm

25%

There are two versions of this model, one with supports, one without. I create my own supports using boxes that have a 0.4mm gap (2 layers) between the model. This works really well on my printers, but may not work for you. You might prefer to generate your own supports.