MORE PRINT VOLUME:

• Increased the lateral separation of 234 mm to 250 mm.

• It has moved 10 mm heated platform down.

• The resulting print volume depends on the platform and the extruder that we place but you can easily get a size bigger than 190 x 190 x 100 mm.

MORE ROBUST:

• The thickness of the acrylic has risen to 6 mm.

• The introduction of a crosspiece to give more rigidity.

• In the attachment points of the rods can be placed brimmed washers (DIN9021).

DESING MADE CONSIDERING THE WIRING:

• The electronics is on the left side of the printer, it is placed horizontally to get the cable up coming from above.

• Parts acrylic have holes or slots provided for wiring.

ACKNOWLEDGEMENTS:

 Like last time, the magnificent infographics have been made with Cinema 4D + VRay by PIKELO.

SPANISH VERSION AT:

http://reprap.org/wiki/Prusa_Aire#PRUSA_AIR_2.2C_Redise.C3.B1o