Yet another version of my label holders. This one can replace the stickable one when there is a problem with adhesion. There are two screw holes designed for 3mm wood screws. The screw head should not be wider than 6 mm. After attaching it with screws just slide the label into the front slot and you are done.

As in the previous design, the length is 60 mm but this time I do not recommend stretching as it will affect the shape of the screw holes.

The label can be made of paper or any other material. The slit is 1.5 mm wide so thicker labels can also be used. Bear in mind that the edges that hold the label limit the visible part by 1 mm on both sides.