I did not like the camera in the corner. I wanted it in the middle and ON the bed. I took into account the housing of the smartextruder and the LED light. The part clips on from the bottom and clips on the top. I removed the original camera and it will fit just right in the slot. I did create the camera slot a bit larger for adjustment with some foam or paper, I did not want to make a snug fit as removal or insertion may cause a micro component to fall off. Pick your preferred orientation and use supports to print. I used PLA with a 80% infill for a bit of flexability, .2 resolution.
Im just starting out with my youtube channel. RESOURCEFUL 3D. https://www.youtube.com/@Resourceful3D