👶 Recommended Age:
Ages 3+ (Perfect for parent-child collaboration and motor skill development!)

📖 About the Model
Bring the joy of the workshop into your child's hands with a toy that perfectly bridges creative role-play and hands-on assembly! The My First Mechanical Workbench playset features a chunky, kid-safe base plate, heavy-duty threaded bolts, a structural connection link, and a perfectly sized flathead screwdriver.

Children can role-play as a builder, carpenter, or mechanic while actively engineering structures by fastening the links directly to the block.

💡 Design Highlight: This model features custom, heavy-duty 45-degree trapezoidal threads designed specifically for 3D printing. With a built-in 0.4mm clearance between parts, the bolts thread into the base incredibly smoothly right off the print bed without sticking or binding!
🧒 Safety First (Child-Friendly Design)
Zero Sharp Edges: Every component features smooth, rounded bevels and radiuses to keep small hands perfectly safe.
No Choking Hazards: All components—especially the bolt heads and screwdriver tip—are oversized (24mm+ core diameter), far exceeding safety minimums for young children.
No Added Hardware: 100% 3D-printable. No metal screws, sharp pins, or toxic glues are required for assembly.

🖨️ Optimized Print Settings (Slice & Print Instantly!)
This model was explicitly engineered for the Creality Cloud community to ensure maximum print success with zero wasted filament.

Supports: NONE (100% Support-Free). Every part sits completely flat on the build plate.
Material: PLA or PETG (Bright, non-toxic colors recommended!)
Layer Height: 0.2mm for clean mechanical thread tolerances.
Wall / Perimeter Count: 3 to 4 walls (Highly recommended to ensure the tool shaft and bolt threads are exceptionally strong during rough play).
Infill: 15% – 20% (Gyroid or Grid).
👨‍👦‍👧 Print Together Challenge!
The best part of this toy is building it together! We highly encourage parents to let their little ones help sort the parts as they finish printing, and work together to master using the screwdriver to fasten the links.

If you print this set with your kids, please share your photos and videos in the comments below! I’d love to see your custom color combinations!