I present another lithophane stand. This one comes with sockets for a plug and a switch. Perfect gift for your loved ones on a birthday or other occasion.

First, make a curved lithophane from lithophanemaker.com and make sure you change the angle to 90° instead of 180°.

Next, you'll want to make sure you get the right hardware:

• Switches
• Power Plug
• Power Cable
• Bulb Holder
• Lightbulb
• Crimps
• Wire (if needed)

Other tools you might need:

• Crimping Tool
• Wire Stripper

Just be sure to wire one of the sides power plug to the switch and the other to the bulb holder. Then wire the other bulb holder wire to the switch. It doesn't matter which wire goes where as long as you have it wired up this way. I suggest using no more than 4 inches of bare wire between the power plug and the switch to prevent having too much wire bundled up in side the stand.