12V Lighter Socket Bracket
jonathan meyer
Trouver des similitudes avec l'IA
Profil d’impression(0)
Fichier modèle(0)
0
0
0
Publié:2026-03-20 03:32:19
0
0
000Description
Tags
Source du modèle
Avis(0)
Summary
I needed a bracket to mount a 12V lighter socket in my solar garden shed. This bracket can be screwed to a flat surface and then the lighter socket fit into the hole. This is on contrast to mounting the socket into a panel, where you need access to the back side of the panel to hook up the wires.
Print Settings
Printer Brand:
Type A Machines
Printer:
Type A Machines 2015 Series 1
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%, or 3D infill @ 2mm spacing
Post-Printing
You may need to clean out the large hole with a deburring tool to fit your lighter socket. You also have the option of only enlarging part of the hole if your socket has flats on the sides and you want it to fit those.
How I Designed This
Autodesk Fusion 360. YouTube video with the design process below:
https://youtu.be/IRPB8AZ9rxA
Tags
Source du modèle
Lien original: Voir les détails
CC BY