远程支架
william_wright947
Trouver des similitudes avec l'IA
Profil d’impression(0)
Fichier modèle(0)
0
0
0
Publié:2026-05-13 10:34:10
0
0
000Description
Source du modèle
Avis(0)
Remote stand that can be used for most smart TV remotes. I designed it with a cavity to add clay for added weight. To do this print both the stand and the tray and pause at the layer before the clay cavity gets covered up. Pack the clay tray with air dry clay and insert it into the part. Resume the print as usual. If you do not want to mess with that you can just allow support material in the cavity and print as usual.
Print settings
Nozzle Temp - 235C
Bed Temp - 80C
Print Speed - 70 mm/s
Retraction - 1mm @20mm/s
Support - On clay cavity if you don't want to use clay
Infill - 15%
Source du modèle
Lien original: Voir les détails
CC-BY