This is a case I designed for the PS/2 to Serial Mouse Adapter by Necroware. There's two slightly different versions of the STL for the case. One includes window supports which should be removed after printing and the other does not.

PCB
https://www.pcbway.com/project/shareproject/PS_2_SERIAL_MOUSE_ADAPTER___necroware___For_converting_PS_2_mouse_to_serial_mouse_.html

Necroware GitHub
https://github.com/necroware/ps2-serial-mouse-adapter

OnShape Model
https://cad.onshape.com/documents/ccf476f9dc78db8b1d509d36/w/eb8ee7f9ae0dad71e16a59b9/e/4ef460f500c7fe437b1cee39?renderMode=0&uiState=680747e2396aad1de4b67dcd

No

No

10

PLA

• Remove the window supports with side cutters (if you printed that version)
• Screw the serial connector to the lid, noting that the "screw blocks" sit behind the serial connector. Use 2.5mm (approx), self tapping screws. Max length 11mm.
• Insert into the main case and align the with the screw hole on the rear side and the access holes at the back
• Screw the case together. Use 3.5mm (approx), self tapping screw. Max length 10mm