Shifter upgrade for G29 gives a more realistic experience when your shifting through those gears!

Still a work in progress, any feedback is welcome. Please note, the orientation of the rail is important, thick end needs to be placed at the back side of the shifter to allow correct clearance (See photos).

I used S/S M4 cap heads, hardware is illustrated in the attached image. I hot melt glued the nuts on the underside to allow for installation of the fixing screws in the G29 however you can skip the 2 x screws in the midpoint area and just use the front screw to assemble if you don't have a glue gun (I left a hole there for this purpose).

Shout out to JuustoPelaa,for the inspiration to make my own design.

Enjoy