Motorbox Qstove
Rough Rain21
Encuentre similares con IA
Perfil de impresión(0)
Archivo de modelo(0)
0
0
0
Publicado:2021-04-23 17:28:39
0
0
000Descripción
Fuente del modelo
Comentarios(0)
Summary
This is a Motorbox design for the qstove pizzaoven.
Parts i got are from www.conrad.nl
On/Off switch
Powersupply ( i did glue it in the top above the switch and powercord )
https://www.conrad.nl/p/mean-well-irm-10-12-acdc-printnetvoeding-12-vdc-085-a-10-w-1293853
Voltage regulator
https://www.conrad.nl/p/spanningsregelaar-mfa-module-222347
Transmission motor 12v 1:200
https://www.conrad.nl/p/transmissiemotor-12-v-modelcraft-rb350200-0a101r-1200-227579
Piece of steel wire or thread wire for keeping the housing in place as it will rotate itself otherwise.
M10 bolt (long) or M10 thread. ( drill a hole in the bottom so it fits on the motor shaft. drill a little hole in the side for a m3 screw to hold the motor shaft)
Powercord, some shrinking sleeve and a soldering gun with solder
Print Settings
Printer Brand:
Anycubic
Printer:
Photon
Rafts:
No
Supports:
Yes
Resolution:
400
Notes:
This is a Motorbox design for the qstove pizzaoven.
Parts i got are from www.conrad.nl
On/Off switch
Powersupply ( i did glue it in the top above the switch and powercord )
https://www.conrad.nl/p/mean-well-irm-10-12-acdc-printnetvoeding-12-vdc-085-a-10-w-1293853
Voltage regulator
https://www.conrad.nl/p/spanningsregelaar-mfa-module-222347
Transmission motor 12v 1:200
https://www.conrad.nl/p/transmissiemotor-12-v-modelcraft-rb350200-0a101r-1200-227579
Piece of steel wire or thread wire for keeping the housing in place as it will rotate itself otherwise.
M10 bolt (long) or M10 thread. ( drill a hole in the bottom so it fits on the motor shaft. drill a little hole in the side for a m3 screw to hold the motor shaft)
Powercord, some shrinking sleeve and a soldering gun with solder
Fuente del modelo
Enlace original: Ver detalles
CC BY