A counter that

Assembly Instructions

What you need:

1. All components listed in this page x 1

2. Rubber band x 1

Assembly Steps:

1. Colour the numbers on the top plate and the top of the handle if needed, I recommend using a tooth pick

2. Wrap the rubber band on the two legs that corner the wide side of the base plate. The rubberband should not be loose or too tight.

3. Place the handle in a way that its narrowest part is caught between the wrapped rubber band.

4. Line up the notches of the top plate with the protruding legs of the base plate. Press the top plate to the base plate. You should hear a click when the top plate is in the right place.

Usage Instructions

1. Fix it onto some vertical surface with adhesives. If you use bluetag the grooves at the back of the main plate will help

2. To change the count you simply lift the handle with your finger and land it below your desired number. 

Remarks

• Feedbacks Welcome!