Filament Runout Sensor V2
KevinWray
Encuentre similares con IA
Perfil de impresión(0)
Archivo de modelo(0)
0
0
0
Publicado:2025-09-18 10:20:58
0
0
000Descripción
Fuente del modelo
Comentarios(0)
Filament Runout Sensor V2
This design is a simple filament runout sensor for 3D printers.
It was made to be mounted on a custom 8 mm chipboard enclosure.
Assembly
- Drill a 15 mm hole in the printer enclosure.
- Insert a PC4-M6 connector into the FilamentRunoutV2Hole.stl part.
- Place this part into the hole from the inside of the enclosure.
- Screw the connector into the M6 thread at the bottom of the FilamentRunoutV2.stl (main body) to secure the sensor to the enclosure.
- Insert a micro switch (KW10 type) into the slot inside the main body.
- Close it with the FilamentRunoutCover.stl part to protect the switch.
Now the sensor is firmly mounted to the enclosure.
Wiring
- Connect the COM and NO/NC terminals of the micro switch to your printer’s filament runout input.
- Configure your firmware settings according to the chosen switch mode (NO or NC).
Features
- Easy mounting: only one hole required in the enclosure.
- Smooth filament guidance with PC4-M6 connector.
- Reliable triggering using a KW10 micro switch.
- Protective cover keeps the switch safe.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3
- Rafts:
No
- Supports:
YesFilament Runout Sensor V2
This design is a simple filament runout sensor for 3D printers.
It was made to be mounted on a custom 8 mm chipboard enclosure.
Assembly
- Drill a 15 mm hole in the printer enclosure.
- Insert a PC4-M6 connector into the FilamentRunoutV2Hole.stl part.
- Place this part into the hole from the inside of the enclosure.
- Screw the connector into the M6 thread at the bottom of the FilamentRunoutV2.stl (main body) to secure the sensor to the enclosure.
- Insert a micro switch (KW10 type) into the slot inside the main body.
- Close it with the FilamentRunoutCover.stl part to protect the switch.
Now the sensor is firmly mounted to the enclosure.
Wiring
- Connect the COM and NO/NC terminals of the micro switch to your printer’s filament runout input.
- Configure your firmware settings according to the chosen switch mode (NO or NC).
Features
- Easy mounting: only one hole required in the enclosure.
- Smooth filament guidance with PC4-M6 connector.
- Reliable triggering using a KW10 micro switch.
- Protective cover keeps the switch safe.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3
- Rafts:
No
- Supports:
Yes
Fuente del modelo
Enlace original: Ver detalles
CC0