A rotatable translucent engraved box and a replaceable frame, suitable for 5V 3W USB LED lights with a 2835 chip. Easily find the lighting that best suits your image.

No support or screws are needed, just a small amount of glue. A model that doesn't require glue

It is suitable for a translucent relief of 10x7.5 cm, with a frame thickness of 3 mm. If you're interested, you can add boxes of other sizes

Translucent relief making tools:https://tool.itslitho.com/UploadImg

This box must use a 4:3 image.

Most of the options are not mandatory. Only the size and the thickness of some parts are important.

USB LED lamphttps://www.aliexpress.com/item/1005008119628598.html

These or similar chips with cables and switches can be easily found in any electrical store. They are widely used in LED bulbs. Just make sure the diameter is 32 mm or smaller.

We also need a small piece of double-sided tape.

The white ring is an ideal way to fix it. Initially, there was only one ring - glued to the bottom of the box, and it was

This is what the original model looks like:

Feel free to use it!