rigid mount that replaces the x-axis cover with this camera mount that doubles a cover.

it mounts with stock hardware with the exception of a 1/4inch bolt to screw the camera into I have included a grip for hand tightening. you may need and additional 3d printed spacer depending on the length of bolt.

print settings

• 0.24mm layer height or less
• I printed mine in petg but play should be fine
• 20% infill
• 3-4 walls 
• supports are required I used auto generated tree supports 

hardware required

• stock hardware
• 1/4inch by ½ long bolt or longer will work to with some spacers

leave a comment if you have any questions