Wall saver that attaches to the wall and protects it from being banged up by a doorknob. Intended to be printed in TPU, but will probably work fine in PLA.

The other designs I found on here weren't quite what I wanted aesthetically/size wise, and were mostly intended to be made in PLA/hard filaments, so I made this one up instead.

The model with a command strip slot is sized to easily fit a standard "poster" command strip. If using the regular model with no command strip slot, I recommend mounting it with some thin double sided wall safe tape, or by making loops of painters tape a la college dorms

Bambulabs

Bambu P1S

No

No

0.12 (0.2 initial layer)

15% gyroid

Seams "back", print the flat face down. The chamfer is 50 degrees so it should come out fine. Plus you get the build plate texture on the forward facing surface, which is nice.