This file is to be used for cutting the frame for the Post-e portable Laser Engraver. The dimensions are designed around fitting the frame atop a standard sized ATX PSU and should be cut from quarter-inch acrylic or comparable material for best results. The layers are labeled for both ETCH and CUT runs for a laser cutter, however the etch design can be whatever your imagination comes up with! Pieces have been arranged to allow most efficient cutting using a 12"x16" cutting bed. Feel free to rearrange the parts to meet your cutting bed specifications. (Model is still a work in progress)

Original project can be found at: http://www.instructables.com/id/Pocket-laser-engraver/?ALLSTEPS

Laser cut or mill out pieces from whatever quarter-inch material you choose.

assemble pieces to match the model shown in the .3dm file

Glue bottom section and top section together separately. You want to be able to lift the top part of the housing off to place electronic parts.