The Rho-Class Shuttle is a larger variant of the Nu-Class Attack Shuttle. It appeared in Star Wars: The Clone Wars, The Bad Batch, and Maul - Shadow Lord.

This model has folding print-in-place wings and a detachable cargo bay. The cargo bay also has two small print-in-place wings on the underside.

It has a hole compatible with big pin and base (link). It needs two pins without cargo bay and one pin with cargo bay.

Rho-class Shuttle

The Rho-Class Shuttle is a derivative of the Nu-Class Shuttle. There are three differences:

• The Rho-Class has a third wing pointing upwards

• The body of a Rho-Class is lengthened

• The Rho-Class often carries a large cargo bay on its underside.

While this ship is best known for its large cargo bay, it also appears without cargo bay in The Bad Batch.

Dimensions

Print Instructions

Do not change the orientation of either part. The print-in-place hinges require a specific orientation.

Shuttle

Printed at 0.15mm layer height.

Requires supports on buildplate.

Brim recommended.

Add "republic shuttle-support blocker" as a support blocker.

Cargo Bay

Printed at 0.15mm layer height.

Requires organic supports.

If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#