I did it guys. I did it so you didn't have to. I did a terrible job of cutting this into parts that fit on the bed of a Bambu X1C. I used Bambu's Cut tool and added pegs for assembly. I realize all of you could just do this yourself but, if you're like me, it might take you several months to overcome your laziness and apathy. So, for those people, you're welcome.

I've printed two of these so far and they fit together well and are surprisingly structurally sound, especially when fully assembled with an attached pc. The monitor and motherboard provide extra strength and rigidity when attached that relieved any anxiety I had about it holding together. I printed the first one in .20 Standard, and the second with .20 Strength, which made a big difference. Both were printed with PETG, which i would recommend for janky setups like this, as my old blower 1080ti gets ridiculously hot. It printed well with tree supports and I only had to trim the joining pegs a little to get the fit fully flush. All parts fused together with super glue/catalyst.

I didn't have the motivation to try and make the version with the handle work somehow, so someone else can do that.

I was intending to wait until I had the space to get a large format printer to print this but I wanted to be able to game together with the wife and kids at one table rather than separate rooms, which this has been great for. 

All credit and thanks to the original author of this wonderful beast.