Project: heidi.hfp
Print with a layer height of 0.08 mm and a base layer height of 0.16 mm, and a 100% fill rate

The model's dimensions are 160x135.21mm.
You can use a higher layer height for printing at a minimum depth of less than 0.48mm
The maximum depth is 2.2mm, and the actual depth is 2.1mm.

Consumables used:
PLA PolyLite Black, Transmission Distance: 0.3
PLA PolyTerra military blue. Transmission distance: 0.3
PLA BambuLab Basic Red, Transmission Distance: 5
PLA BambuLab Basic Brown, Transmission Distance: 2
PLA BambuLab Basic, BambuLab Green. Transmission distance: 4
PLA BambuLab Matte Light Purple, Transmission Distance: 2
PLA BambuLab Basic Beige. Transmission distance: 8
PLA BambuLab Basic Jade White, Transmission Distance: 5
This printer uses 8 unique consumables

Replacement instructions:
Start with black
Switch to navy blue at the 7th layer
Switch to red at the 10th layer
Switch to brown at the 12th layer
Switch to BambuLab green at the 16th layer
Switch to light purple at the 18th layer
Switch to beige at the 22nd layer
Switch to jade white at the 24th layer