This is a remix of the great Raspberry Pi zero 2w case provided by @BlackyIV. Thank you, BlackyIV for this great case. 

Their case is a great case for the Raspberry Pi zero 2w, but it has two major drawbacks: 

Due to the honeycombs structure it is almost impossible to fix the case onto something else (e.g. glueing it onto something) and there is no way to get the camera cable out of the case. 

I removed one row of the honey comb structure on one of the less thermal-load-intensive parts of the pie (left side/SD-Card-side) and added a hole for the camera cable. (The marker on the picture shows the modded area)

The top side remains unchanged. 

I recommend printing the case with a high-temperature filament like ASA/ABS as the pie can get quite hot even with optimal ventilation. 

The print shown has been done with a 0.16mm setting on a P1S with SUNLU PLA, later models printed with 3D Jake ASA without problems.