I didnt want to buy the CR2430 batteries for the Tuya 4 button switch. 

I had some parts lying around from some old projects and realized this stand was perfect for hiding a battery pack with 2 AA batteries and the plugs that I was able to add to the switch using an adapter for the CR2430 slot that I quickly designed. I went this route because I wanted to avoid soldering if I wanted to revert back to the CR2430s for any reason in the future.

The wires can be routed out the lock if careful with the wire routing and with a bit of pressure when sliding the back cover back on.

I prefer this solution since I can use rechargable AAs and the battery life should be significantly longer than the coin cells.