Bookmark from Shukemao

I have a license for this image

With a layer height of 0.08mm and a base layer of 0.16mm, the infill rate is 100%

The model's dimensions are 58.33x174.99mm.

You can choose a higher floor height, but it cannot be less than the minimum depth of 0.48mm.

The maximum depth is 2.2mm, and the actual depth is 2.2mm.

Consumables used:
PLA BambuLab Basic Black. Transmission distance: 0.6
PLA BambuLab Basic Brown. Transmission distance: 2
PLA Geeetech Gold, transmission distance: 3
PLA BambuLab Basic Jade White. Transmission distance: 4
This print uses four different consumables

Replacement instructions:
Starting with black
Switch to brown on the 9th layer
Switch to gold on the 14th layer
On the 19th layer