X-UAV Talon came with no tray for the flight controller. I designed this such that the flight controller will be mounted above the fuselage floor inside the wooden cage. Rotate all the parts by 90 degree when printing. ABS or PLA will do. To install, glue the clip/holder on the surface of the wooden cage. Use 4 pcs M3 x 15mm screws and M3 nuts to secure the tray. Zip ties can also be used as alternative to screws.

Print instructions:
print the clip/holder 2x, print the tray 1x

Doesn't Matter

No

0.2

10%