KelTec Sub2000 Gen2 Hinged Picatinny Optic Mount.

Just an initial post to put the files and pics up. Will need to update with exact measurements and count of hardware - will need four 45-50mm M3 bolts to bolt the Left and Right pieces to the handguard and reuse the original lock nuts, one 35mm or so M3 bolt for the hinge between the Left and Top pieces, and one small M3 bolt and a pen spring for the small locking nub between the Top and Left pieces when the optic is folded away. Some sanding is needed to create clearance between the nub on the Right piece and the ejector window. Inspired by the flip-up nature of the MCarbo optic mount, otherwise did all measurements myself and modeled with an embarrassing amount of cuts and shapes in Tinkercad.

Printed with an Ender 3 Pro, settings were general but bumped up for durability - 4 walls, 3 top & bottom layers, 30% infill, supports as needed, etc. Just used whatever black PLA I had around.

Full disclosure, I have not range-tested this mount yet to see if it will withstand the recoil and not shatter on the very first shot.

Small remix of the latch pieces from Matereo.