Misumi SAR linear slider insert

Use this sturdy and durable 3D printable insert to upgrade the linear slider of your FTC robot. This insert is specifically designed for use withRope-drivenof the rigging systemMisumi SAR series linear slidesDesign. It's very suitable for use in a competitive environment.FTC robotCreate reliable ones during the competitionRobotic lifting deviceAnd othersLinear motionAn institution. It was tested by the teams participating in the qualifiers of the World Championship.

Assembly and rigging tutorial video:

🚀 Main features and advantages:

• Full compatibility with the Misumi SAR series:Precisely designed, it can be seamlessly integrated with Misumi's renowned SAR slider series. It is compatible with the following products:
  • SAR200 series
  • SAR300 series
• High-intensity and durable structure:It is durable and can withstand the stringent requirements of FTC competitions. The insert has been tested and can reliably support the robot lifting mechanism of a 20-kilogram robot driven by two motors at 435 rpm.
• The rope rigging has been optimized:It is designed for the smooth and consistent operation of rope-based linear slider systems.
  Reliable performance: Provide stable and reliable linear guide rails for the key mechanisms of robots.

🛠 Required hardware:
• M3 locking nut
• 8mm countersunk M3 machine screws
• 40mm countersunk M3 machine screws
• V-groove bearing
• Optional: m3 socket nuthttps://www.rvspaleis.nl/moeren/hulsmoeren/verzonken-binnenzeskant/9062-2-3_1-Used for stacked slider configuration
 

💡 Installation and stacking tips:

• Standard installation:Follow the detailed instructions in the assembly video to operate.
• Stack multiple sliders:To achieve better stability when stacking sliders, please replace the standard M3 locking nut with an M3 sleeve nut.
  1. Drill a 4.5mm hole at the required installation point of the Misumi slider.
  2. Insert the socket nut from the other side.
  3. Use 8-mm M3 countersunk screws to fix the insert.
  4. Apply Loctite glue

⚙️ Recommended printing settings:

• Materials: PETG, PLA+, ASA, or ABS
• Floor height: 0.2mm
• Filling: Swirl curve 40-60%
• Number of outer walls/circumference: 3-4
• Direction: Place the largest plane on the printing platform to print for the best results.
• No support is needed

🔗 Other rigging options:

I'm looking for theseMisumi SAR sliderofBelt driveComponents? Check out our supplementary model:https://makerworld.com/en/models/1247251-linear-slide-insert-for-misumi-slides-belt-ftc#profileId-1269017