Project: viudabeige.stl.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.6mm and the Actual Depth is 2.7mm

Filaments Used:
    PLA Overture Chocolate Transmission Distance: 0.2
    PLA BambuLab Basic Beige Transmission Distance: 8
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments

Swap Instructions:
    Start with Chocolate
    At layer #6 (0.56mm) swap to Beige
    At layer #12 (1.04mm) swap to Jade White for the rest.