Project: colores.hfp
Print with a 100% fill rate, a layer height of 0.08 mm, and a base layer height of 0.16 mm

The model's dimensions are 123.27x170mm.
You can use a higher layer height for printing at a minimum depth of 0.48 mm or less
The maximum depth is 2.2mm, and the actual depth is 2.2mm.

Consumables used:
PLA PolyTerra military blue. Transmission distance: 0.3
Bambu Lab PLA Basic Green. Transmission distance: 2
Bambu Lab PLA Basic Blue. Transmission distance: 2
Bambu Lab PLA Basic Beige. Transmission distance: 8
Bambu Lab PLA Basic Yellow. Transmission distance: 6
Bambu Lab PLA Basic Ivory White. Transmission distance: 5
This printer uses six unique consumables

Switching instructions:
Starting with the military blue
Switch to green on the 7th layer
Switch to blue on the 9th layer
Switch to beige on the 13th layer
Switch to yellow on the 18th layer
Switch to jade white on the 20th layer