Filament Holder...Holder

Intro

A parametric filament holder...holder created with Blender Geometry Nodes (Blender 4.0.1), which maintain a certain distance between 2 Filament Holders (it's purchased online not printed!!). STL file has been tested on 1kg BambuLab filament spool and should work for other 1kg spools.

Notes

1. Please double check the parameters for your filament holder before printing!
2. Increase Gap Width to accommodate wider spools
3. Increasing Bottom Thickness is not recommended since it may cause the filament holder to hang

For non-Blender users

1. Download and install Blender (free & open source 3D modeling software)
2. Open .blend file
3. Adjust parameters
4. Select the generated object (left or right click on object until you see a orange outline around it) and choose File->Export->Stl, check Selection Only, Scene Unit and Apply Modifiers then click Export STL
5. Open exported STL file in your slicer

Changelog

• 2024-3-2 Add OpenSCAD file so you should be able to use the Customizer App to tweak its parameters online. Note: I only played with OpenSCAD for 1 hour so be careful with the code :3

Feedback

Please leave a comment if you encounter any problem and/or have any suggestions

Happy printing :)