A Makerbot inspired Bio-hazard Spool Holder. I will not be able to print this design out for a few days due to my printer still in the hands of ups. I will print this out and show a video of it in use, if it functions well. If it does not function properly i will remake this completely or make some modifications.
Thank you everyone for downloading or viewing my project! it really means a lot to me!

Before you start, choose which size you want. Walls are the same, however, the length of the "connector_spool" and "connector_floor" are different sizes. The regular size kit is 150 mm long. The other sized kit is 118 mm long. Make sure if you want the 118mm only print the parts with "118mm kit" at the end of the file name, besides the wall.

1. Connect the "Connector_spool" to the "wall".
2. Place the "Connector_spool" through filiment spool hole.
3. Place the end of the "Connector_spool" through 2nd "wall".
4. Place the hexagon connectors on "Connector_floor" inside the holes at the bottom of the two walls.
5. Enjoy!

Number Of Parts Required

• 2 "wall"
• 1 "Connector_spool"
• 1 "Connector_floor"