A cosplay arm blaster.

Anycubic

Photon Mono X

No

Doesn't Matter

hollow

If using PLA old school printer:

Printing temperature: 200 °C
Bed temperature: 50 °C
Speed: 50 mm/s
Layer height: 0.08 mm
Shell thickness: 0.80 mm
Retraction: 6 mm @ 25 mm/s
Infill: 50%
Initial layer speed: 20 mm/s
Initial fan speed: 0%

Initial layer thickness: 0.20 mm, 0.24 mm
Initial layer speed: 30 mm/sec, reduce further if you have problems
Number of slower layers: 5
Initial fan speed: 0%

If this makes you happy, feel free to throw me a tip at PayPal.Me/SMunger37

Set support infill to 5% and ZERO walls and it will come off the support base layer easier.
or
Turn on support interface at 2mm thickness and 50%

You should have a cosplay wrist blaster.

I designed this in Tinkercad.