Hello!

I'm making models related to Counter-Strike, and I came across the CS2 Kilo Box. I thought it would be easy to make, so I'm sharing it with you all here.

You can use it as a storage container or a regular prop!

It's perfect for all fans of Counter-Strike 2 and CS:GO!

Print settings:

• The layer height of the box part is 0.2mm, and the layer height of the black part is 0.12mm.
• Fill rate: 15% gyroid
• No support is needed

Required materials:

1 tube of super glue

1 paperclip

You need to attach the small black parts to the box with strong glue. I've also provided printable hinges, but if the print quality isn't good, you can cut paper clips to the appropriate length and use them as hinges for the box.

Components that need to be glued with strong adhesive:

3 small black parts - pasted on the front of the box lid.

1 large black part - placed above the empty area on the box lid.

1 lightning-shaped part - placed in the middle of the diamond-shaped area.

All the black parts need to be glued with strong adhesive.

If you're curious about the AK47 in the picture, it's a bag clip I designed. Feel free to check it out:

https://makerworld.com/en/models/555597#profileId-474375

https://makerworld.com/en/models/566509#profileId-486192