Dragon con mirada intensa.

se puede modificar X Y pero no Z

Project: draon azul.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 114.22x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 3.1mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Jade White Transmission Distance: 5
    PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
    PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #17 (1.44mm) swap to Jade White
    At layer #18 (1.52mm) swap to Marine Blue

Border Only Colors from here until the end.
    At layer #27 (2.24mm) swap to White for the rest.