Tired of pegs that rust, snap, or vanish into the mystery drawer? This little clip keeps things simple. It is a one-piece design that flexes where it should and holds when it counts. The tapered jaws grab thin fabrics easily, the long side slots add flex for an easy squeeze, and the scalloped grips with a ribbed pad make it comfy for all hand sizes. Rounded edges are kinder to your clothes and to your fingers.

There is also a round hole near the bridge if you want to hang it on a hook or add a lanyard. Print a bunch in your favorite colors and make laundry day a little brighter.

Quick specs

• Size: 80 × 20 × 5 mm (L × W × T)

• Style: springless, one piece, print in place

• Features: tapered jaws, long flex slots, scalloped grips, ribbed finger pad, rounded corners

Print it like this

• Orientation: flat on the bed, ribbed pad facing up

• Layer height: around 0.20 mm

• Walls: 4

• Infill: 40 to 60 percent (go higher for a stiffer clamp)

• Supports: none

• Brim: optional if your plate is very smooth

Material tips

• PETG or ASA for outdoor use and sun

• PLA or PLA+ for indoor use or mild weather