It's Tic Tac Toe- with a Twist!

The rules are still about the same: get three of your piece in a row. However, you now have another choice on your move; you can now flip your opponents piece to become your own. If all spots do eventually get filled, keep flipping pieces until someone gets three in a row. You cannot change a piece back that was changed the turn before.

Out of necessity, (certainly not because I wanted to,) there are 2 new rules. These are only here to prevent what could very quickly become a boring and unfair advantage: 

1: You cannot flip a piece if you have already flipped a piece on your previous turn. you must place down at least 1 piece before being allowed to flip again.

Example: 

O places a piece down at the top left.

X flips that piece.
O places a piece down in the middle.

X cannot flip that piece; he flipped a piece on his previous turn.

2: You cannot flip a piece that was flipped by your opponent on a immediate previous turn.

Example:

O places a piece in the top right.

X flips that piece.

O cannot flip that piece; X flipped that piece the turn before.

Removing pieces can be a bit tricky (well, mainly the X pieces). Here's how I did it.

O: Grab the middle with a finger and just pull it out.

X: Turn the X until it looks more like an O. Grab the middle with a finger and pull it out.

This Model is Designed to be printed without AMS.

Enjoy!

Extra Info: (all for Bambu A1 Specifically)

Board Filament Consumption (PLA): 12.51m or 37.33g.

Board Filament Cost (PLA): 75 cents. 

Prepare Time: 5 minutes and 44 seconds.

Print Time: 1 hour and 18 minutes.

Board Time: About 1 hour and 24 minutes.

Pieces Filament Consumption (PLA): 4.12m or 12.28g.

Pieces Filament Cost (PLA): 25 cents.

Prepare Time: 5 minutes and 44 seconds.

Print Time: 47 minutes and 53 seconds.

Pieces Time:  53 minutes and 37 seconds.

Total Filament Consumption (PLA): 16.62m or 49.56g.

Total Filament Cost (PLA): 1 dollar. (yes, literally.)

Prepare Time: 5 minutes and 44 seconds. (For each part.)

Print Time: 2 hours, 11 minutes, and 37 seconds.

Total Time: About 2 hours and 20 minutes when printed separately. (Give or Take.)