Light up your G-System!

These 4 brackets will remove approximately 1 kg of weight from your G-System.

I designed these brackets because I decided to lighten my pedal board. I was having to carry 13Kg of pedal board on my shoulder. The original metal supports of the G-System weigh about 1.2Kg, while these in PLA only 0.2.
Then with other measures that have nothing to do with 3D printing, I arrived at 10Kg of total weight of my pedal board.

Print at 20% infill. You have to mirror the two STLs with your slicer, for the left side of the G-system. You will also need 1 nut M6 and a screw M6 a little longer than the original, to fix everything to the G-system.

No

Yes

200

20