This is designed for one of those 185mm diameter 1.1 Kg Haribo sweet buckets. I'm using those buckets as worktable garbage bin for years and thought about this hanger to free up some space on my table.

Designed two small countersunk holes in case you want to mount it with 4mm screws. I used some 3M mounting tape as seen in the pictures.

Print standing upright, maximum overhang angle is about 46° - that should print quite well.

I used 2 perimeters, 20% infill and 0.2 mm layer height.

Creality

Ender 3 Pro

Doesn't Matter

No

0.20

20