Designed this pick for my friend in blender

printed in Hatchbox black pla 1.75mm at 200c nozzle and 60c bed with 0.2mm layer height sliced in Cura

0.9mm thin

no supports needed.

I sanded it down a little for it to be a little smoother but it should work fine without sanding

If size is off I use the slicer scale on the y axis and set it to 30mm long

Artillery Sidewinder X1

No

No

0.2

20%

Might be too fragile depending on the material but the black pla for me is pretty durable.

Please give feedback if something is wrong or if it needs adjustments.