! -> UPDATED VERSION HERE: https://www.thingiverse.com/thing:4785050

This is a modular storage system I designed for USB devices and SD cards. They are ready-to-print as is or you can edit the .stl to generate your own configurations. There are some different configurations included to suit your needs:

-Base config:
6x USB slots
2x full-size SD card slots
4x micro SD card slots

-No Micro SD config:
6x USB slots
4x full-size SD card slots

-No Full Size SD config:
6x USB slots
8x micro SD card slots

Additionally, I have provided the following:

-Base config with connectors on both sides
-Base config with receptacles on both sides

And lastly, if you'd like to use this without the modular functionality, I've also included the base config without any connectors so it can be printed as a standalone piece.

Print these in any combination / quantity you need. They snap together using the connectors and receptacles on the sides. Each piece takes somewhere between 1 hour and 1 hour 15 minutes to print on my FlashForge Creator Pro.

These have been test-printed extensively and are currently in use in a business environment.

FlashForge

Creator Pro

No

No

81x46x9

15

I printed these in ABS 1.75mm but it should work just fine with PLA as well.

This was made 100% in Tinkercad with default shapes and tools.