My cat jumped from the top of the cupboard onto my Vileda Infinity Flex cloth dryer and unfortunatelly broke its wing off.
I have designed replacement parts for the two broken plastic hinges.
I had to make a tool to ease the disassembly of the hinges.
Steps:

• Pull out the red VILEDA cover part (use a small flat screwdriver to pry it out if necessary)
• Lay down the cloth dryer to the floor on its side and insert the tool into the center of the hinge
• Push the tool until clicks then pull the upper half of the hinge with the leg of the dryer.
• Put the printed part to its place then push back the upper half of the hinge and the red cover.
• Change the other side too if it was broken.
• Insert the wing back into the printed part and fix it with a screw. I used a 4.2x13mm Pan head selfdrilling screw.
• Enjoy

Creality

K2 Plus

No

No

50%