This goes along with the Starlink Gen 3 pole mount and a few pieces of 1.25" Schedule 40 PVC pipe and end caps.
A nice way to keep your dish off the ground when you need to set it up away from your RV in order to get a clear view of the sky.
I printed with supports from the build plate only with PETG.
I wouldn't recommend PLA from a strength perspective.. ABS would work as well.
I had to wrap a couple layers of clear cellophane packing tape on the tips of the PVC being inserted into the tripod unit in order to get a good friction fit. This way it is easy to disassemble for storing.
You can cut the legs to the length of your liking. I made them 2' long ea after trying 3' and seeing it was too wieldy.
Plus a short piece to stick in the top to mate with the Pole mount model, drilled a hole in that PVC for the pin to go through and glued the short piece into the top of the tripod.