A small key chain for any bookworm!

I recommend painting it to your liking after printing or even adding your own sticker to it, you can do whatever you want with this model.

Note:
The photo example was printed using a 0.4mm nozzle with the 0.08mm High Quality setting, no further modifications were made.
There is a slight issue on the bottom of the printed model, caused by bridging and from the way the printer lays down the bottom of the “pages”. I currently don't really know how to solve it, but I wouldn't recommend adding any sort of supports, maybe in the future I will modify the model slightly so the bottom slices better.