Since I could not find an enclosure that fit my 2x16 character display, I made my own one. 

The case is 120mm by 65mm, total height is 35mm. My LCD is 80.5mmx36.5mm, its screw holes are spaced 75mmx31mm, and the viewing area is 64mmx14mm.

I made preparations to drill holes for buttons underneath the display if needed, as well as a cable entry (left bottom). For customization I added the FreeCAD file and the step files.

I left the blank infill inside the box, since there is no necessity for a smooth inner surface, and this way I save filament and print time.

Printer: Sovol Zero
Nozzle: 0.4mm Brass
Filament: Sunlu PETG white