This is my first project I made on Blender as a newcomer to 3D printing.

While there are many phone stands out there, I found many of them are either a bit too wobbly for my liking or are harder than necessary to print (e.g. requires supports).

I primarily made this for myself as I prefer the stand to be stable, even if it means more filament will be used.  The idea was to not require any supports, hold the phone high enough for a charging cable to be plugged in, and allow the cable to be routed underneath via a tunnel.

I've included 3 versions: one with my username on it (why not?), one that is flat on the surface, and one that has the spikey background but no text, allowing you to put your own logo or name or whatever in place of my username.

In case you want to add your own text, the angle of the holder is 60.5689 degrees.

I printed this in 1 hr & 15 min with Sunlu transparent PLA (green) and eSun PLA Plus (pine green) on an MK4 with the following settings on Prusa Slicer:

• 0.20mm SPEED
  • Layers and Perimeters
    • Horizontal Shells
      • Solid Layers - 3
      • Min Shell Thickness - 0.5mm
  • Infill
    • Fill Density - 5%
    • Fill Pattern - Adaptive Cubic
• Generic PLA
  • eSun PLA Plus
    • Nozzle Temp
      • First Layer - 215C
      • Other Layers - 210C
  • Sunlu Transparent PLA
    • Nozzle Temp
      • First Layer - 220C
      • Other Layers - 210C

This stand can hold my iPhone 14 Pro Max with a case on perfectly.

Let me know what you think if you decide to try it out!