Needed something to help pull the battery out of the stock, didn't really want to yank on the wires.

Yes I could've used a bit of ribbon, but didn't have any but I do have a £400 printer next to me 👍

This is designed for the Nuprol 1200mAh  Amazon Link

2.5 has a slightly stronger battery clamp thing at the top

I used a 0.25 nozzle for a stronger part but you should be able to get away with a 0.4 if you reduce lines to 0.32 and print slowly at 0.18 layer heights

Print Settings:  Takes 13 mins~ to print

nozzle:0.25

line width:0.22

max infill / walls

0.14 layer height