Description

This item allows you to attach a camera mount to a 1-inch post.

Print settings

• Sliced with Prusa Slicer 2.9.2 for Prusa MK3S+
• PLA 0.20mm 
• layer height 40% infill 
• Vertical shells 
  • Perimeters 12 
• Horizontal shells 
  • Solid layers top: 12, bottom: 4 
  • minimum thickness: top: 0.7mm, top: 0.5mm 
• Auto generate support materials 
• Support style: Grid 
• Contact distance 0.2mm (detachable) 
• Position so 1-inch hole is vertical.

Post print

• The suport material was pretty easy to pull out. 
• I used a 5/16" drill to clean up the bolt hole.

Parts

• Lock 
  • 2-1/2" long x 5/16" dia. hex head bolt 
  • 5/16" hex nut 
  • 5/16" flatwasher 
• Mount 
  • Arkon CMPHD006 1/4"-20mm Camera Wall Mount 

If you use a mount with a different screw pattern the part's walls are thick enough that drilling new holes will work fine.